本文選題：堇青石 + 莫來石�。� 參考：《中國陶瓷》2017年01期

【摘要】：以堇青石、莫來石、高嶺土和氧化鋁微粉為原料制備堇青石-莫來石窯具材料,研究了燒成溫度、保溫時間對堇青石-莫來石窯具材料的常溫性能、高溫抗折強度和抗熱震性的影響。并通過XRD分析了試樣燒成后的物相變化,通過SEM觀察了試樣的顯微結構。結果表明:隨燒成溫度從1340℃提高到1400℃,試樣的線膨脹率增加,顯氣孔率增加,常溫抗折、常溫耐壓強度和高溫抗折強度增大,但1370℃燒成后的試樣的抗熱震性最好;對1370℃燒成的試樣,隨保溫時間從3 h延長到5 h,試樣的常溫性能、高溫抗折強度及抗熱震性都有所降低。綜合分析,在1370℃下保溫3 h燒成的試樣性能較為優良。
[Abstract]:Cordierite-mullite kiln furniture materials were prepared from cordierite, mullite, kaolin and alumina powder. Effects of high temperature flexural strength and thermal shock resistance. The phase changes of the samples after sintering were analyzed by XRD and the microstructure of the samples were observed by SEM. The results show that with the increase of sintering temperature from 1340 鈩，

本文編號：1870371