本文選題：水溶性輕質砂芯模 + 力學性能��； 參考：《工程塑料應用》2017年07期

【摘要】：以聚乙烯醇(PVAL)水溶液作為基體材料,以模型砂為增強材料,經過熱烘干工藝制作了一種水溶性砂芯模材料,著重對水溶性輕質砂芯模的制備工藝特點、力學性能和水溶性能進行研究,并將所制得的水溶性輕質砂芯模成功用于樹脂基復合材料結構件的制造中。結果表明,水溶性輕質砂芯模較純砂芯模(1.60 g/cm~3)輕24%,比金屬模具的鋼材密度(7.85 g/cm3)輕84.5%;水溶性輕質砂芯模的壓縮強度隨著溫度的升高而降低,當溫度為150℃時,輕質砂芯模的壓縮強度為4.09 MPa;水溶性輕質砂芯模的各項性能滿足復合材料結構件制造的要求。
[Abstract]:A kind of water-soluble sand core molding material was prepared by using polyvinyl alcohol PVAL-water solution as matrix material and model sand as reinforcement material. The characteristics of preparation process of water-soluble lightweight sand core mould were emphasized. The mechanical properties and water-soluble properties were studied, and the water-soluble light-weight sand core mold was successfully used in the manufacture of resin-based composite structural parts. The results show that the water-soluble lightweight sand core mould is lighter than that of pure sand core mould (1.60 g / cm ~ (3), which is 84.5% lighter than the steel density of metal mould (7.85 g / cm ~ (3), and the compression strength of water-soluble light sand core mould decreases with the increase of temperature, when the temperature is 150 鈩，

本文編號：1832455