本文選題：擺碾鉚接 + 膠接�。� 參考：《玻璃鋼/復合材料》2017年04期

【摘要】：使用擺碾鉚接、膠接和擺碾-膠接混合連接技術對玻璃纖維增強樹脂基復合材料進行連接,通過拉伸試驗檢測該連接方式下的靜強度。比較了不同連接方式的連接效果,分析了膠接時間、有無墊圈、多鉚釘對連接強度的影響。實驗表明擺碾-膠接混合連接能夠有效提高連接件強度;墊圈對抗拉伸性能影響最大,加墊圈試件承載能力可顯著提升29.46%;在一定時間范圍內,膠接時間的延長可以大幅度提高連接件的靜強度;然而與拉伸方向一致的雙鉚釘使用不能提升板料拉伸性能。
[Abstract]:The fiberglass reinforced resin matrix composites were bonded with pendulum rolling riveting, gluing and pendulum grinding. The static strength of glass fiber reinforced resin matrix composites was tested by tensile test. The influence of bonding time, gasket and multiple rivets on the connection strength is analyzed. The experimental results show that the strength of the joint can be improved effectively by swinging and gluing, and the bearing capacity of the bearing capacity of the specimen with the washer can be significantly increased by 29.46. within a certain time range, the bearing capacity of the bearing capacity of the bearing capacity of the test piece with the washer can be increased significantly. The static strength of the joint can be greatly improved by the extension of bonding time, but the tensile properties of sheet metal can not be improved by using double rivets with the same tensile direction.
【作者單位】： 華東交通大學;
【基金】：國家自然科學基金項目(51265012) 江西省贛鄱英才555工程領軍人才培養計劃(贛才字[2012]1號)
【分類號】：TB332
，

本文編號：1817008