本文選題：液滴微流控 + 微通道并行�。� 參考：《華東理工大學》2017年碩士論文

【摘要】：微流控技術在制備功能材料方面極具效率性和優勢性,但是目前一直局限在實驗室規模,制約著其產業化應用。本文基于微通道并行概念,圍繞微通道并行放大規律以及微通道制造加工兩條主線展開研究,旨在實現規�；苽涔δ懿牧系哪繕�(biāo)。本文創新性提出了多級模塊化的微通道放大策略,并基于流阻模型建立了三維復雜分支管網的壓力平衡模型,推導出模塊的設計準則,揭示了放大參數、分配均勻性和通道設計參數之間的內在聯系。在放大規律理論的指導下,基于激光雕刻技術以PMMA材料作為基板加工了八個通道陣列、十個陣列堆疊、五個堆疊模塊集成的微流控放大系統,實現液滴微流控技術三級放大及規�；苽渚鶆蛞旱蔚哪繕�(biāo)。同時,研究了通道陣列放大和陣列堆疊放大所產生的放大效應。以殼聚糖體系為例,規�；苽淞宋⒚准�(jí)的殼聚糖微球,在提升產量的同時保持了良好的單分散性。同時探索新型3D打印技術在成型微通道方面的應用。成型了三維結構微通道,驗證了液滴制備與表面濕潤特性無關性。采用數值模擬的方法研究了在重力作用下流體的分配性能,并以此作為指導,設計并3D打印了八通道豎直并行的微流控模塊,實現了多通道并行規�；苽湟旱蔚哪繕�(biāo)。以海藻酸鈉體系為例,規�；苽淞撕Ｔ逅徕}微球。
[Abstract]:Microfluidic technology has high efficiency and superiority in the preparation of functional materials, but at present, it is limited in the scale of laboratory, which restricts its industrial application. Based on the concept of microchannel parallelism, this paper focuses on the microchannel parallel amplification law and microchannel manufacturing and processing, in order to achieve the goal of large-scale preparation of functional materials. In this paper, a multi-level modularized microchannel amplification strategy is proposed. Based on the flow resistance model, the pressure balance model of a three-dimensional complex branch pipe network is established, the design criteria of the module are derived, and the amplification parameters are revealed. The relationship between distribution uniformity and channel design parameters. Under the guidance of the amplification law theory, based on the laser engraving technology, the microfluidic amplification system with eight channel arrays, ten arrays stacked and five stacking modules is fabricated with PMMA material as the substrate. To achieve the goal of three-stage amplification and large-scale preparation of uniform droplets by droplet microfluidic technology. At the same time, the amplification effects of channel array amplification and array stacking amplification are studied. Taking chitosan system as an example, micrometer chitosan microspheres were prepared on a large scale, which kept good monodispersity while increasing yield. At the same time, the application of new 3D printing technology in shaping microchannel is explored. Three-dimensional microchannels were formed to verify that the preparation of droplets was independent of surface wetting characteristics. The distribution performance of fluid under gravity is studied by numerical simulation. Based on this, an eight-channel vertical parallel microfluidic control module is designed and 3D printed, which realizes the goal of multi-channel parallel large-scale preparation of droplets. Calcium alginate microspheres were prepared on a large scale with sodium alginate as an example.
【學位授予單位】：華東理工大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TB34

【參考文獻】

相關期刊論文 前8條

1 崔青;趙紅;張長橋;徐建鴻;;殼聚糖功能微球負載貴金屬的研究進展[J];化工進展;2017年02期

2 趙紅;徐曉敏;徐建鴻;王濤;駱廣生;;微流控制備殼聚糖功能材料研究進展[J];化工學報;2016年02期

3 褚良銀;汪偉;巨曉潔;謝銳;;微流控法構建微尺度相界面及制備新型功能材料研究進展[J];化工進展;2014年09期

4 汪偉;謝銳;巨曉潔;褚良銀;;微流控法制備新型微顆粒功能材料研究新進展[J];化工學報;2014年07期

5 劉瑩;呂陽成;駱廣生;;微流控技術制備微膠囊負載鈀催化劑[J];催化學報;2013年09期

6 任夫健;凌永社;王慶志;;化工放大技術方法的研究[J];現代化工;2011年S1期

7 駱廣生;蘭文杰;李少偉;徐建鴻;呂陽成;;微流控技術制備功能材料的研究進展[J];石油化工;2010年01期

8 陳光文,袁權;微化工技術[J];化工學報;2003年04期

，

本文編號：1811810