本文選題：單寧酸　切入點：膠原膜　出處：《皮革科學與工程》2016年06期

【摘要】：采用單寧酸對膠原膜進行改性,考察不同濃度的改性劑(0.4~1.8 g/L)對膠原膜性能的影響,通過測量其熱變性溫度、吸水率、酶解后的質量保持率及機械強度,來表征改性前后膠原膜性能的變化,結果表明:當單寧酸濃度為1.2 g/L時,改性后膜的性能最優。紅外光譜分析表明,單寧酸分子的酚羥基與膠原分子發生了多點氫鍵結合,并且膠原的三股螺旋結構未被破壞;最佳濃度改性后膠原膜的熱穩定性提高,耐酶解性能增強,機械強度增加,但吸水率卻降低,說明單寧酸作為改性劑可以有效改善膠原膜的性能。
[Abstract]:The modification of the collagen membrane of tannic acid and modifier effects of different concentration (0.4~1.8 g/L) effect on the properties of collagen membrane, water absorption by measuring the thermal denaturation temperature, quality, enzymatic hydrolysis, retention rate and mechanical strength, change, to characterize the modified collagen membrane performance results show that when the tannic acid the concentration of 1.2 g/L, the optimal performance of the modified membrane. Infrared spectroscopic analysis showed that tannic acid molecule of hydroxyl group and collagen molecules occurred with hydrogen bond, and collagen three helix structure was not damaged; improve the thermal stability of the optimal concentration of modified collagen membrane after enzymolysis resistance, and improves the performance of machinery the strength increases, but the water absorption rate decreased and that performance of tannic acid as modifier can effectively improve the collagen membrane.

【作者單位】： 四川大學皮革化學與工程教育部重點實驗室;四川大學制革清潔技術國家工程實驗室;廣西大學環境學院;
【基金】：國家高技術研究發展計劃(863計劃)項目(No:2013AA065701)
【分類號】：TB383.2

【相似文獻】

相關期刊論文 前8條

1 張敏;王唐;李國英;;膠原膜糖基化產物的制備及表征[J];皮革科學與工程;2014年01期

2 林曉艷,劉科偉,魯建,陳一權,張興棟;兩種醫用膠原膜~(60)Co輻照改性的比較[J];化學研究與應用;2004年02期

3 史佳巍;李學敏;劉玲蓉;關Z，

本文編號：1693274