本文選題：多孔緩沖材料　切入點：微波成型　出處：《中南林業科技大學學報》2017年08期

【摘要】：本研究以木纖維、木粉、發泡劑、膠黏劑等為原料,采用微波成型工藝制備木纖維多孔緩沖材料,系統研究了材料配比對木纖維多孔緩沖材料特性的影響規律,獲得了優化的材料配方。結果表明:采用正交試驗法優選得出基于微波成型工藝的木纖維多孔緩沖材料最佳配方為木纖維用量6.8%,加水量61.8%,AC用量1.6%,木粉用量9.0%,由此配方制得試樣的密度為1.47×105 g·m-3,0.17 MPa應力所對應的緩沖系數為6.52,平均回彈率為75.6%。與傳統熱壓成型工藝相比,微波成型工藝可以降低98%以上的能耗,對工業化生產意義更大。
[Abstract]:In this study, wood fiber, wood flour, foaming agent and adhesive were used as raw materials to prepare wood fiber porous buffer material by microwave molding technology. The effects of material ratio on the properties of wood fiber porous buffer material were systematically studied. The optimized material formula was obtained. The results showed that the optimum formula of wood fiber porous buffer material based on microwave molding technology was the amount of wood fiber 6.8, water content 61.8% AC 1.6, wood flour 9.0%. The results showed that the optimum formula of wood fiber porous buffer material based on microwave molding technology was as follows: the amount of wood fiber was 6.8, the amount of water added was 61.8 and the amount of AC was 1.6. The density of the sample prepared by the formula is 1.47 脳 105g m ~ (-3) m ~ (-3) MPa stress. The buffer coefficient corresponding to the stress is 6.52, and the average springback is 75.6%. Compared with the traditional hot pressing process, Microwave molding technology can reduce the energy consumption by more than 98%, which is more significant for industrial production.
【作者單位】： 東北林業大學;
【基金】：中央高�；究蒲袠I(yè)務費專項(2572016AB25) 林業公益性行業科研專項(201304506)
【分類號】：TB383.4

【相似文獻】

相關期刊論文 前4條

1 于麗萍;生物分解性緩沖材料上市[J];包裝與食品機械;2000年04期

2 ;相關學科與技術[J];電子科技文摘;2000年05期

3 余妙春;謝擁群;;低密度竹纖維膨化材料的性能研究[J];華東紙業;2010年01期

4 奚海蓮;;植物纖維發泡緩沖材料生產工藝方法綜合研究[J];農機化研究;2007年05期

相關會議論文 前1條

1 溫志堅;劉月妙;;緩沖材料國外研究進展[A];中國礦物巖石地球化學學會第十屆學術年會論文集[C];2005年

相關碩士學位論文 前3條

1 朱琦;微細化纖維復合淀粉制備發泡緩沖材料的研究[D];廣西大學;2012年

2 陳銳;緩沖材料在液晶模組綁定制程中的應用研究[D];華南理工大學;2014年

3 楊星星;可降解淀粉基緩沖材料的制備及其性能研究[D];南京農業大學;2009年

，

本文編號：1675866