本文選題：Mg基共晶合金　切入點：高溫儲熱　出處：《功能材料》2017年02期

【摘要】：選取Bi、Sn、Cu、Zn、Ni、Si等元素分別加入Mg基體中,熔煉得到7種Mg基二元和三元高溫相變儲熱共晶合金。運用固溶體準化學模型及其2種簡化形式對Mg基共晶合金的熔化相變焓進行計算,并通過DSC實測值對預測值進行驗證。結果表明,7種Mg基共晶合金的實測熔點在450~600℃范圍內,實測熔化相變焓200kJ/kg左右。由簡化模型得到的預測值同實測值匹配度較高,能夠用于Mg基多元共晶合金熔化相變焓的預測。此外,提高熔化熵值高的元素比例并增加組元數,可以提高共晶合金體系的熔化相變焓。
[Abstract]:Seven kinds of Mg-based binary and ternary high temperature phase change heat storage eutectic alloys were obtained by melting Bi-Sn-Sn-CuOZZn-NiON-Si and other elements into mg matrix. The melting enthalpy of Mg-base eutectic alloy was calculated by using the solid solution quasi chemical model and its two simplified forms, and the melting enthalpy of Mg-base eutectic alloy was calculated. The results show that the measured melting point of 7 Mg-base eutectic alloys is in the range of 450 鈩，

本文編號：1658384