本文選題：全同聚-丁烯　切入點：石墨烯　出處：《合成樹脂及塑料》2017年03期 　論文類型：期刊論文

【摘要】：通過溶解-絮凝法制備了全同聚1-丁烯(1-iPB)/石墨烯(GE)復合材料,采用差示掃描量熱儀研究了純1-iPB和1-iPB/GE復合材料的結晶性能,使用偏光顯微鏡觀察了其等速率降溫結晶和等溫結晶情況。結果表明:GE起到了異相成核劑的作用,GE使1-iPB的結晶溫度明顯提高,從純1-iPB的67.7℃提高到77.3℃,結晶半峰寬變窄;等速率降溫結晶時,1-iPB/GE復合材料出現晶體的溫度高于純1-iPB,GE提高了基體的結晶溫度;85℃等溫結晶時,1-iPB/GE復合材料晶體長滿整個視野的時間低于純1-iPB,結晶速率明顯比純1-iPB快,且晶粒數目多,粒徑小。
[Abstract]:The homopolymer 1-Ib BU / graphene GE composites were prepared by dissolution-flocculation method. The crystallization properties of pure 1-iPB and 1-iPB/GE composites were studied by differential scanning calorimetry (DSC). The isothermal crystallization and isothermal crystallization of 1-iPB were observed by polarizing microscope. The results showed that the crystallization temperature of 1-iPB was obviously increased from 67.7 鈩，

本文編號：1648486