本文選題：聚合物薄膜　切入點：微結構　出處：《上海交通大學學報》2017年09期 　論文類型：期刊論文

【摘要】：利用卷對卷熱輥壓工藝連續、高效和粉末冶金成形技術精度高的優點,提出了一種在聚合物薄膜表面制備微結構粉末的熱輥壓成形工藝方法,構建了聚合物薄膜表面微結構粉末熱輥壓成形工藝試驗系統并進行了粉末熱輥壓成形工藝試驗,通過單因素試驗研究了工藝參數(模具溫度、輥壓速度和輥壓力)對成形質量的影響規律.結果表明,采用模具溫度130~145℃,輥壓速度0.2~0.8m/min和輥壓力250~500N的粉末熱輥壓成形工藝參數,能夠得到聚合物粉末充型完整的微金字塔陣列結構.
[Abstract]:Based on the advantages of continuous roll pressing, high efficiency and high precision of powder metallurgy forming technology, a hot roll pressing process for preparing microstructural powder on the surface of polymer film was proposed. In this paper, a test system for hot roll forming process of polymer film surface microstructure powder was constructed. The process parameters (die temperature) were studied by single factor test, and the hot roll forming process test was carried out on the surface of polymer film. The effect of roll pressing speed and roll pressure on the forming quality is studied. The results show that the powder hot roll forming process parameters, such as die temperature 130 ~ 145 鈩，

本文編號：1581894