本文關鍵詞： 熱處理制度 鋁基復合材料 超聲振動輔助熱處理 力學性能 耐磨損性能　出處：《熱加工工藝》2017年12期 　論文類型：期刊論文

【摘要】：采用不同熱處理制度對石墨烯增強新型建筑鋁基復合材料進行了熱處理,并進行了材料力學性能及耐磨損性能的測試與分析。結果表明:與常規熱處理相比,機械振動輔助熱處理材料的抗拉強度、屈服強度和斷后伸長率分別增大6%、9%、11%,磨損體積減小22%;40Hz超聲振動輔助熱處理材料的抗拉強度、屈服強度和斷后伸長率分別增大23%、34%、91%,磨損體積減小53%;20Hz超聲振動輔助熱處理材料的抗拉強度、屈服強度和斷后伸長率分別增大9%、14%、32%,磨損體積減小32%;60Hz超聲振動輔助熱處理材料的抗拉強度、屈服強度和斷后伸長率分別增大18%、26%、54%,磨損體積減小39%。熱處理制度優選為40Hz超聲振動輔助熱處理。
[Abstract]:The graphene reinforced new building aluminum matrix composites were heat-treated with different heat treatment systems, and the mechanical properties and wear resistance of the materials were tested and analyzed. The results showed that compared with the conventional heat treatment, the mechanical properties and wear resistance of the composites were tested and analyzed. The tensile strength, yield strength and elongation after break of mechanical vibration assisted heat treatment materials are increased by 6% and 9%, respectively, and the wear volume is reduced by 22 ~ 40 Hz ultrasonic vibration assisted heat treatment materials. The yield strength and the elongation after breaking are increased by 23%, respectively, and the wear volume is reduced by 53 Hz and 20 Hz ultrasonic vibration assisted heat treatment material's tensile strength. The yield strength and the elongation after breaking are increased by 9%, respectively, and the wear volume is reduced by 32 Hz and 60 Hz ultrasonic vibration assisted heat treatment material's tensile strength. The yield strength and the elongation after breaking are increased by 18%, respectively, and the wear volume is reduced by 39%. The optimum heat treatment system is 40Hz ultrasonic vibration assisted heat treatment.
【作者單位】： 遼源職業技術學院;
【基金】：吉林省職業教育與成人教育教學改革研究一般課題資助項目(2015ZCY151)
【分類號】：TB333;TG156

【相似文獻】

相關期刊論文 前1條

1 陳晗;向楷雄;龔文強;劉建華;;熱處理制度對LiFePO_4/C復合材料結構和電化學性能的影響[J];材料熱處理學報;2011年01期

，

本文編號：1522661