復雜系統安全控制在重大危險源管理中的應用
[Abstract]:At present, accidents caused by major hazard sources occur frequently in our country, the fundamental reason is that the disaster mechanism of the system is unknown, the research work is divorced from the real system, and the lack of systematic point of view and systematic thinking. In this paper, the particle reactor is used as the simplified model of the complex system, and the collapse mechanism of the reactor is explored under different conditions. Therefore, the disaster mechanism and safety control method of complex system are put forward, on the basis of which the accident mechanism of production system is analyzed, and the safety control mode of production system is put forward. The results are applied to the safety management of major hazards, the management system of major hazards is constructed, and the identification, classification and evaluation techniques of major hazards are improved. The main work is as follows: (1) the cataclysm mechanism of complex systems can be essentially attributed to the chain reaction mechanism of energy dissipation. Based on four factors: external input, system structure, system boundary and system state under certain boundary conditions, this paper explores the catastrophic mechanism of complex system through reactor experiment. The safety control method of complex system is put forward. (2) the influencing factors and action mechanism of system accident are analyzed, the safety control mode of production system is put forward, and the management system of major hazard source is constructed. (3) the identification of hazard source, Classification and evaluation are the basis of major hazard management. In this paper, the current identification, classification and evaluation techniques of major hazard sources are improved, and a static and dynamic classification method of major hazard sources is proposed. Establish the evaluation system of major hazard sources. (4) carry on the static and dynamic classification to the major hazard sources of a company, and put forward the concrete management suggestions and safety control measures for the company.
【學位授予單位】:西南科技大學
【學位級別】:碩士
【學位授予年份】:2017
【分類號】:X913.4
【參考文獻】
相關期刊論文 前10條
1 周煜明;郭洪洲;耿孝雪;;危險化學品重大危險源辨識中的若干問題與對策[J];當代化工研究;2016年05期
2 師立晨;王如君;多英全;;我國危險化學品重大危險源安全監管存在問題及建議[J];中國安全生產科學技術;2014年12期
3 時龍;;復雜系統研究的基本思想及教育反思[J];教育科學研究;2013年07期
4 錢學森;許國志;王壽云;;組織管理的技術——系統工程[J];上海理工大學學報;2011年06期
5 魏亞興;吳超;胡漢華;;近十年我國安全系統工程學發展研究綜述[J];中國安全生產科學技術;2011年06期
6 王爽;王志榮;;危險化學品重大危險源辨識中存在問題的研究與探討[J];中國安全科學學報;2010年05期
7 陽富強;吳超;覃妤月;;安全系統工程學的方法論研究[J];中國安全科學學報;2009年08期
8 劉驥;高建明;關磊;于立見;;重大危險源分級方法探討[J];中國安全科學學報;2008年06期
9 王喜奎;吳宗之;孫猛;魏利軍;;關于重大危險源辨識標準修訂的探討[J];中國安全科學學報;2007年01期
10 張巍,蔣軍成,張明廣,虞漢華;城市重大危險源普查與分級技術探討[J];安全與環境學報;2005年04期
相關博士學位論文 前1條
1 李仕雄;沙堆演化動態特性及自組織臨界現象研究[D];西南交通大學;2004年
相關碩士學位論文 前4條
1 王豪;復雜系統演化趨勢及其在經濟中的應用[D];西南科技大學;2016年
2 蒯磊;系統安全控制在隧道工程施工中的應用研究[D];西南科技大學;2016年
3 王慧;重大危險源辨識、分級與評估的研究[D];中北大學;2014年
4 崔益源;基于DT法的石油化工碼頭儲罐區危險源動態分級研究[D];天津理工大學;2014年
,本文編號:2492687
本文鏈接:http://sikaile.net/kejilunwen/anquangongcheng/2492687.html