【摘要】：隨著《消防給水及消火栓系統技術規范》(GB 50974-2014)2014年10月1日起實施,填補了建筑消防系統設計規范的一些空白,同時也將一些問題呈現在設計過程中。結合項目設計落實上述規范過程中所遇問題,以及對其相關條款的理解,對幾個問題進行探討:消防系統供水主泵啟�？刂品绞�、供水主泵壓力開關啟泵設定值、流量開關設置位置及動作數值、消防備用泵啟�？刂品绞�。
[Abstract]:With the implementation of the Technical Specification for Fire Water supply and Fire hydrant system (GB 50974 / 2014) from October 1, 2014, some gaps in the design code of building fire control system have been filled, and some problems have been presented in the design process. Combined with the problems encountered in the process of project design and implementation of the above specifications, as well as the understanding of its relevant provisions, this paper probes into several problems: the starting and stopping control mode of the water supply main pump in the fire control system, the setting value of the pressure switch of the water supply main pump, The flow switch sets the position and the action value, the fire standby pump starts and stops the control mode.
【作者單位】： 柏誠工程技術(北京)有限公司;
【分類號】：TU892

【相似文獻】

相關期刊論文 前5條

1 尹忠海，，劉劍;電磁式流量開關的應用[J];純堿工業;1995年01期

2 李楠;;用三角形相似性縮短變流量開關井周期時間的探討[J];中國石油和化工標準與質量;2013年02期

3 王劍飛;;選礦球磨機軸承潤滑油系統流量監控改造[J];新疆有色金屬;2013年S2期

4 畢明華;;靶式流量開關在空壓機斷水保護中的應用[J];煤礦機械;2008年06期

5 ;[J];;年期

本文編號：2481895