【摘要】：為了準確分析加工車間關鍵風險因素,考慮多風險因子交互影響的情境,提出了一種基于模糊決策實驗室分析法的加工車間關鍵風險因素定量分析方法。首先,從人員、設備、環境、物料和管理因素等5個維度辨識加工車間風險因素并建立風險因素集;基于此,采用三角模糊數對專家判斷語義進行表征,然后運用DEMATEL法計算多因素耦合下的風險重要度,從而確定加工車間的關鍵風險因素。最后,以安徽省某機械加工車間為例,說明所提出方法的應用過程。結果表明,加強對安全制度和安全文化建設等關鍵風險因素的控制,有助于加工車間的風險控制,改善車間生產安全。
[Abstract]:In order to accurately analyze the key risk factors in processing workshop, a quantitative analysis method of key risk factors in processing workshop based on fuzzy decision laboratory analysis was proposed, considering the situation of interaction of multiple risk factors. Firstly, the risk factors of processing workshop are identified and the set of risk factors is established from five dimensions: personnel, equipment, environment, material and management. Based on this, the expert judgment semantics is represented by triangular fuzzy number, and then the risk importance degree under the coupling of multiple factors is calculated by using DEMATEL method, and the key risk factors in the machining workshop are determined. Finally, taking a machining workshop in Anhui Province as an example, the application process of the proposed method is explained. The results show that strengthening the control of key risk factors, such as safety system and safety culture construction, is helpful to the risk control of the processing workshop and the improvement of the production safety of the workshop.
【作者單位】： 安徽科技學院管理學院;中國礦業大學礦業學院;
【基金】：安徽省教育廳人文社科重大項目(SK2014ZD022) 安徽科技學院人才引進項目(SRC2014400)
【分類號】：X941

【參考文獻】

相關期刊論文 前8條

1 張進春;吳超;侯錦秀;黎敏;;生產車間安全管理狀況的區間數模糊綜合評價方法研究[J];安全與環境學報;2006年02期

2 汪偉忠;盧明銀;周波;張鵬;高明;;基于集對分析的車間安全管理能力評價[J];安全與環境學報;2013年03期

3 林嘉豪;李克武;張兵;;基于風險耦合理論的航空裝備本質安全管理研究[J];中國安全生產科學技術;2011年09期

4 劉東亮;徐浩軍;張久星;;多因素耦合復雜飛行情形風險定量評估方法[J];航空學報;2013年03期

5 劉全龍;李新春;王雷;;煤礦事故風險因子耦合作用分析及度量研究[J];統計與信息論壇;2015年03期

6 韓剛;;石化企業安全生產模糊綜合評價系統的研究[J];消防科學與技術;2009年05期

7 張銳;王紅君;張q，

本文編號：2321195