本文選題：煤礦井下 + 定向鉆孔��； 參考：《煤炭科學技術》2015年02期

【摘要】：針對現有煤礦井下定向鉆進技術與裝備存在的技術問題,提出采用ZDY12000LD大功率定向鉆機、泥漿脈沖無線隨鉆測量系統、配套鉆具及復合定向鉆進工藝進行煤礦井下定向鉆進。結合現場試驗,完成了主孔深度1 881 m的定向長鉆孔,驗證了ZDY12000LD鉆機功率大、鉆進及事故處理能力強的特點。同時,無線隨鉆測量系統測量精度高;配套復合定向鉆進技術形成的鉆孔孔壁光滑,沉渣少,鉆孔曲率小,鉆進效率高。說明上述鉆進技術與裝備可滿足水平定向長深鉆孔等的施工要求。
[Abstract]:In view of the technical problems existing in the existing directional drilling technology and equipment in coal mine, it is proposed to use ZDY12000LD high power directional drilling rig, mud pulse wireless while drilling measurement system, matching drilling tools and compound directional drilling technology to carry out directional drilling in coal mine. Combined with field test, the directional long hole with a depth of 1881 m was completed, and the characteristics of ZDY12000LD drilling machine with high power and strong ability of drilling and accident handling were verified. At the same time, the measurement accuracy of wireless while drilling measurement system is high, and the borehole wall is smooth, the sediment is less, the borehole curvature is small and the drilling efficiency is high. The above drilling technology and equipment can meet the construction requirements of horizontal directional long depth drilling and so on.
【作者單位】： 中國煤炭科工集團西安研究院有限公司;
【基金】：國家科技重大專項資助項目(2011ZX05041-001)
【分類號】：TD712.6

【參考文獻】

相關期刊論文 前8條

1 石智軍;李泉新;許超;;煤礦井下隨鉆測量定向鉆進技術及應用[J];地質裝備;2013年06期

2 郭東瓊;;煤礦井下隨鉆測量定向鉆進用PDC鉆頭的研制[J];金剛石與磨料磨具工程;2011年03期

3 郝世俊;煤礦井下水平定向鉆進技術的發展[J];煤田地質與勘探;2004年02期

4 姚寧平;;我國煤礦井下近水平定向鉆進技術的發展[J];煤田地質與勘探;2008年04期

5 劉剛;;基于Pro/E的PDC鉆頭參數化設計[J];煤田地質與勘探;2012年02期

6 姚寧平;姚亞峰;張杰;蔣玉璽;馮達暉;李浩;;煤礦井下梳狀定向孔鉆進技術與裝備[J];煤炭科學技術;2012年10期

7 石智軍;溫榕;方俊;李泉新;高s，

本文編號：2066572