本文選題：建井 + 硐室群　； 參考：《煤礦安全》2015年09期

【摘要】：立井建設安全監測過程中,需要采用FLAC3D對立井建設中開挖的大硐室、硐室群等復雜結構進行安全性評估,但FLAC3D在模擬較復雜模型的情況下,建立三維網格模型的效率很低,建模時間長且難度大;基于軟件內部單元節點生成規則,研究了2種軟件內部單元節點編號順序并進行了轉換,最終導出了FLAC3D可以識別的文檔并生成了實體單元和結構單元。結果表明:這種三維建模方法可行,使原有費時費力的建模變的簡單快速,節約建模時間70%以上,對指導立井建設中的安全監測項目有較大的價值。
[Abstract]:In the process of safety monitoring of shaft construction, it is necessary to use FLAC3D to evaluate the safety of large cavern, chamber group and other complex structures excavated in vertical shaft construction. However, when FLAC3D simulates more complex models, the efficiency of establishing 3D mesh model is very low. The modeling time is long and difficult. Based on the rules of generating internal unit nodes, two kinds of software internal unit node numbering order are studied and converted. Finally, the documents recognized by FLAC3D are derived and the entity unit and structure unit are generated. The results show that this 3D modeling method is feasible, makes the original time-consuming and laborious modeling simple and fast, saves more than 70% of modeling time, and has great value for guiding the safety monitoring project in shaft construction.
【作者單位】： 北京中煤礦山工程有限公司;煤礦深井建設技術國家工程實驗室;
【基金】：“十二五”國家科技支撐計劃資助項目(2012BAK04B09) 天地科技青年基金資助項目(KJ-2014-BJZM-01)
【分類號】：TD76

【參考文獻】

相關期刊論文 前5條

1 汪吉林;丁陳建;吳圣林;;基于FLAC~(3D)的復雜地貌三維地質建模[J];地質力學學報;2008年02期

2 徐文杰;胡瑞林;;基于逆向工程的三維復雜地質體精細建模及ADINA前處理在FLAC~(3D)建模中的應用[J];工程地質學報;2008年05期

3 胡斌,張倬元,黃潤秋,許強;FLAC~(3D)前處理程序的開發及仿真效果檢驗[J];巖石力學與工程學報;2002年09期

4 鄭文棠;徐衛亞;童富果;石安池;;復雜邊坡三維地質可視化和數值模型構建[J];巖石力學與工程學報;2007年08期

5 張U，

本文編號：1923678