本文選題：噴孔 + 壓風排粉��； 參考：《煤炭技術》2017年02期

【摘要】：在煤礦井下鉆進過程中,噴孔事故一直是難以解決而又經常發生的問題。突出松軟煤層鉆進應使用壓風排粉,排粉能力不足容易造成鉆孔堵塞,使得瓦斯梯度升高,積聚的瓦斯會突破堵塞,造成噴孔事故。由風流在鉆孔內部的各個阻力損失,求出鉆進過程中排粉所需要的風壓,分析鉆孔傾角與鉆屑運移的關系,利用合理的排粉參數能夠順利地排出鉆屑,減少噴孔事故的發生。
[Abstract]:In the process of underground drilling in coal mine, hole injection accident is always difficult to solve and often occurs. In the drilling of outburst soft coal seam, the pressure air should be used to drain the powder, which can easily lead to the borehole blockage, which makes the gas gradient rise, and the accumulated gas will break through the blockage, resulting in the accident of jetting hole. According to the loss of resistance of air flow inside the borehole, the air pressure needed to discharge powder during drilling is calculated, and the relationship between drilling inclination angle and cuttings migration is analyzed, and the drilling chip can be discharged smoothly by using reasonable discharge parameters, and the occurrence of blowout accident can be reduced.
【作者單位】： 河南理工大學安全科學與工程學院;河南省瓦斯地質與瓦斯治理重點實驗室-省部共建國家重點實驗室培育基地;
【分類號】：TD713.3
，

本文編號：1910361