本文選題：瓦斯抽放 + 定向鉆機��； 參考：《煤礦安全》2016年03期

【摘要】：針對大型高瓦斯礦井的鉆掘交替矛盾日益突出難題,詳細介紹了定向鉆機的組成部分和工作原理。定向鉆進裝備主要包括全液壓動力頭式履帶鉆機、孔底測量探管、通纜鉆桿、孔口監視器等主要配套設備,通過基于計算機自動控制系統的孔口監視器對螺桿鉆具反扭角進行定量計算來實現鉆孔的定向鉆進和方位控制。最后,進行了工業試驗,試驗結果表明:主孔深度≥500m,鉆孔成孔率達80%,各個參數均達到預期指標,可以滿足煤礦實際生產的需要。
[Abstract]:In view of the increasingly prominent contradiction between drilling and driving in large and high gas mines, this paper introduces in detail the component and working principle of directional drilling rig. The directional drilling equipment mainly includes the full hydraulic power head crawler drill, the hole bottom measuring and detecting pipe, the cable drill pipe, the hole mouth monitor and so on. The directional drilling and azimuth control are realized by the quantitative calculation of the reverse torsion angle of the screw drill tool based on the orifice monitor of the computer automatic control system. Finally, the industrial test is carried out. The results show that the depth of the main hole is 鈮，

本文編號：1867817