本文選題：ZigBee　切入點：煤礦安全監測　出處：《工業安全與環�！�2015年01期

【摘要】：針對基于煤礦安全監測的Zig Bee網絡中數據傳輸?shù)奶攸c(diǎn),對Zig Bee原有路由算法進行改進,提出了一種多路徑路由協議。在協議中,重點考慮煤礦發生突發事件時大量緊急數據的傳輸問題,在事發節點與協調器節點之間建立多條路徑并發地傳輸數據,提高數據的傳輸速率和可靠性,并且在尋找多條路徑時,只將RREQ分組轉發給父節點或者滿足能量和廣播半徑要求的網絡深度更低的鄰居節點。仿真結果顯示,改進后的路由協議在數據量大、發包速率更快的情況下表現出更優的性能,滿足煤礦安全監測的要求。
[Abstract]:According to the characteristics of data transmission in Zig Bee network based on coal mine safety monitoring, the original routing algorithm of Zig Bee is improved, and a multipath routing protocol is proposed.In the protocol, the transmission of a large number of emergency data in coal mine emergencies is considered, and multiple paths are established between the accident node and the coordinator node to transmit the data concurrently, so as to improve the transmission rate and reliability of the data.When searching for multiple paths, only the RREQ packets are forwarded to the parent nodes or neighbor nodes with lower network depth that meet the requirements of energy and broadcast radius.The simulation results show that the improved routing protocol has better performance and meets the requirements of coal mine safety monitoring under the condition of large amount of data and faster outputting rate.
【作者單位】： 鄭州航空工業管理學院計算機科學與應用系;河南信息工程學校;
【基金】：河南省科技攻關計劃項目(122102210444,142102210575)
【分類號】：TD76;TN92

【參考文獻】

相關期刊論文 前6條

1 范雪;秦寧寧;徐保國;;Zig Bee樹路由算法在煤礦傳輸中的改進[J];傳感器與微系統;2012年05期

2 劉銘;楊智勇;常超;;基于WSN的煤礦安全監測預警系統設計[J];礦業安全與環保;2013年03期

3 謝川;;基于ZigBee的AODVjr算法研究[J];計算機工程;2011年10期

4 周武斌;羅大庸;;ZigBee路由協議的研究[J];計算機工程與科學;2009年06期

5 李昊e，

本文編號：1725030