本文關鍵詞： 打磨鐵粉 粉塵爆炸 最低著火溫度 爆炸下限 爆炸指數　出處：《消防科學與技術》2017年07期 　論文類型：期刊論文

【摘要】：為研究金屬加工過程中產生鐵粉的爆炸危險性,采用G-G管式爐與20 L球形爆炸測試裝置對常溫常壓下3種打磨鐵粉進行測試,得到鐵粉試樣的可燃性分類等級及爆炸參數,并依據實驗結果對試樣粉塵的爆炸危險性進行分級。試驗結果表明,三種鐵粉試樣的粉塵云最低著火溫度分別是480、420、580℃,爆炸下限質量濃度分別在125~375、60~125、250~375g/m3,爆炸指數分別為9.23、8.96、5.84 MPa·m/s,其粉塵爆炸危險性等級均為St1級。
[Abstract]:In order to study the explosion risk of iron powder produced during metal processing, three kinds of grinding iron powder were tested by G-G tube furnace and 20L spherical explosion test device at room temperature and atmospheric pressure. The flammability classification and explosion parameters of iron powder samples were obtained, and the explosion hazard of sample dust was classified according to the experimental results. The minimum ignition temperature of dust cloud of three kinds of iron powder samples is 480,420,580 鈩，

本文編號：1464182