Nowadays,Many building fires occur because of the short circuit of electric current.The data we get from the DKI Jakarta government is the capital city of Indonesia that in 2018 the number of fires in Jakarta was 692 incidents,and a short circuit of electric current caused 480 incidents,the data on the causes of fires due to short circuit of electric current is the highest cause of 80%.The total loss was more than 81,000,000 RMB,and the death toll was more than 6,300（injured and dead）.It can be ... 

【文章來源】：華南理工大學廣東省 211工程院校 985工程院校 教育部直屬院校

【文章頁數(shù)】：74 頁

【學位級別】：碩士

【文章目錄】：
Abstract
ACKNOWLEDGEMENTS
LIST OF ABBREVIATIONS
CHAPTER 1:INTRODUCTION
    1.1 Background
    1.2 Electrical Safety Device
        1.2.1 Conventional Electrical Safety Device
        1.2.2 Research of Electrical Safety Device
    1.3 Objective of this Thesis
    1.4 Advantages and Applications
    1.5 Thesis Organization
    1.6 Contribution
CHAPTER 2:PRINCIPLES OF THERMAL CAMERA
    2.1 Related Research
    2.2 Infrared Thermography Fundamentals
    2.3 Thermal Imaging Camera
    2.4 Infrared thermography applications
        2.4.1 Monitoring and maintenance
        2.4.2 Vibrothermography
        2.4.3 Environment
        2.4.4 Biomedical applications
CHAPTER 3:DESIGN OF ELECTRICAL SAFETY DEVICES
    3.1 Research Objective
    3.2 Analysis of Device Requirement
    3.3 Details Components
        3.3.1 Hardware
        3.3.2 Software
    3.4 Design of Device
        3.4.1 Block Diagram System
        3.4.2 Hardware design
        3.4.3 Software design
    3.5 Device Testing Methods
CHAPTER 4:RESULT AND ANALYSIS
    4.1 Device Design Results
        4.1.1 Hardware design results
        4.1.2 Results of software design
    4.2 Device Testing
        4.2.1 Testing the device for light
        4.2.2 Testing the device for room temperature
        4.2.3 Interface Testing
    4.3 Testing of device implementation
    4.4 Analysis of Implementation Results
        4.4.1 Implementation Analysis by disabling the automatic breaker system
        4.4.2 Implementation Analysis by activating an automatic breaker system
CHAPTER 5:CONCLUSION
    5.1 Conclusion
    5.2 Future Work
REFERENCES
附件



本文編號：3346819