本文選題：PE + 應變率��； 參考：《新型建筑材料》2017年10期

【摘要】：管道用聚乙烯(PE)材料除承受靜荷載外,還會承受動態荷載和不同溫度的作用,因此研究聚乙烯材料在靜、動態荷載及不同溫度下的力學性能是有必要的。對PE管道材料進行不同溫度和不同應變率的壓縮實驗研究,獲得PE在-70～120℃和10~(-4)～10~3 s~(-1)范圍內應力-應變曲線,分析應變率和溫度對PE屈服應力的影響規律。結果表明:屈服應力隨溫度降低和應變率增大而增大;在-70～120℃和低應變率條件下,屈服應力與溫度關系可以用帶指數函數多項式進行描述;在室溫條件和應變率為10~(-4)～10~3 s~(-1)范圍內,屈服應力隨應變率的關系較為復雜。
[Abstract]:Polyethylene (PE) materials used in pipelines are subjected to dynamic loads and different temperatures in addition to static loads, so it is necessary to study the mechanical properties of PE materials under static and dynamic loads and at different temperatures. The compression experiments of PE pipeline materials at different temperatures and different strain rates were carried out. The stress-strain curves of PE were obtained in the range of -70 鈩，

本文編號：2080627