結構安全性設計的廣義方法
本文選題:結構可靠度 + 分項系數法。 參考:《建筑結構學報》2017年10期
【摘要】:基于概率的分項系數法是結構可靠度通用設計方法,也是我國現行結構設計規范的重要基礎,但在30多年的實際應用中,該方法已逐漸顯現出廣義性和可靠度控制精度不足等缺陷。借鑒國際標準ISO 2394:2015中設計值法的基本思路,根據前期提出的結構安全性設計的廣義表達式和標準靈敏度系數的取值方法,提出結構安全性設計的廣義方法,并對其進行了必要的簡化。該方法可在設計中直接考慮基本變量概率特性、目標可靠指標和設計使用年限變化對設計結果的影響,基于作用和結構性能的新近統計結果,建立新材料、新型結構的可靠度設計方法,并允許業主選取不同的目標可靠指標和設計使用年限,具有良好的普適性,較國際標準中的設計值法也更具有實用性。理論和實例分析結果表明:廣義設計方法采用了利用解析優化提出的標準靈敏度系數建議值,可更好地實現對可靠度的控制;該法較目前的分項系數法和設計值法具有更高的可靠度控制精度。
[Abstract]:The method of sub-coefficient based on probability is the general design method of structural reliability, and it is also the important foundation of the current structural design code in China. However, it has been applied in practice for more than 30 years. The method has gradually shown some defects such as broad sense and low precision of reliability control. Referring to the basic idea of the design value method in the international standard ISO 2394: 2015, and according to the generalized expression of the structural safety design and the value method of the standard sensitivity coefficient, the generalized method of the structural safety design is put forward. And it is necessary to simplify it. This method can directly consider the probability characteristics of basic variables, the influence of the reliability index of target and the change of design life on the design results. Based on the recent statistical results of function and structural performance, the new materials are established. The reliability design method of the new structure, and allows the owner to select different target reliability index and design service life, has good universality and is more practical than the design value method in the international standard. The results of theoretical and practical analysis show that the generalized design method adopts the suggested value of standard sensitivity coefficient proposed by analytic optimization, which can better control the reliability. The reliability control accuracy of this method is higher than that of the current method of subdivision coefficient and design value.
【作者單位】: 西安建筑科技大學土木工程學院;
【基金】:國家自然科學基金項目(50678143,51278401)
【分類號】:TU318
【相似文獻】
相關期刊論文 前10條
1 朱建國;談住宅中安全性設計[J];四川建筑;1996年01期
2 杜耀東;;建筑安全性設計問題[J];建筑安全;2012年06期
3 宋劍華;住宅的實用性和安全性設計[J];工程設計;1996年03期
4 張明;;園藝碎枝機的安全性設計研究[J];包裝工程;2011年24期
5 楊一葦;張?chǎng)H;張艷茹;;建筑的安全性設計探討[J];甘肅科技;2014年01期
6 楊正平,石東浩;幼兒園空間安全性設計初探[J];華中建筑;2004年01期
7 朱建國;住宅的安全性設計研究[J];新建筑;1996年03期
8 趙晨洋;于芬;;城市開放空間的景觀安全性設計研究[J];山西建筑;2010年04期
9 孫文平;王電章;;室內環境安全性設計研究[J];現代商貿工業;2010年23期
10 付靜;;幼兒園設施安全性設計分析與研究[J];藝術與設計(理論);2011年06期
相關會議論文 前10條
1 李云貴;;廣義隨機空間內的結構可靠度逼近分析方法[A];中國科學技術協會首屆青年學術年會論文集(工科分冊·上冊)[C];1992年
2 李繼華;;為推動結構可靠發的研究和應用共同努力[A];工程結構可靠性——中國土木工程學會橋梁及結構工程學會第七屆學術會議論文集[C];1987年
3 劉健新;李子青;何福照;;主觀不確定因素對結構可靠度的影響[A];工程結構可靠性——中國土木工程學會橋梁及結構工程學會第七屆學術會議論文集[C];1987年
4 李云貴;趙國藩;張保和;;結構可靠度的逼近分析方法[A];工程結構可靠性——中國土木工程學會橋梁及結構工程學會結構可靠度委員會全國第三屆學術交流會議論文集[C];1992年
5 李正農;周軍;袁文陽;宋一樂;孟吉復;;結構可靠度的非參數估計方法[A];第五屆全國結構工程學術會議論文集(第一卷)[C];1996年
6 李剛;程耿東;;一種高效的結構可靠度近似分析方法[A];第十屆全國結構工程學術會議論文集第Ⅲ卷[C];2001年
7 劉宏偉;吳勝興;;結構可靠度理論的應用現狀及發展趨勢[A];第十三屆全國結構工程學術會議論文集(第Ⅲ冊)[C];2004年
8 呂大剛;;論結構可靠度理論中的概率變換[A];中國力學學會學術大會'2005論文摘要集(下)[C];2005年
9 王天慶;吳世偉;張思俊;;結構可靠度數值計算法[A];工程結構可靠性——中國土木工程學會橋梁及結構工程學會結構可靠度委員會全國第二屆學術交流會議論文集[C];1989年
10 金偉良;;廣義結構可靠度的分析方法[A];第三屆全國結構工程學術會議論文集(上)[C];1994年
相關博士學位論文 前4條
1 楊杰;結構可靠度計算方法及靈敏度分析研究[D];大連理工大學;2012年
2 朱平華;綠色高性能混凝土的性能研究與混凝土結構可靠度的敏感性分析[D];武漢理工大學;2004年
3 梅剛;基于非線性隨機有限元的結構可靠度問題研究[D];清華大學;2005年
4 蒲德群;建筑結構安全水平的合理設置方法及策略研究[D];清華大學;2005年
相關碩士學位論文 前10條
1 吉U,
本文編號:1924309
本文鏈接:http://sikaile.net/jianzhugongchenglunwen/1924309.html