天堂国产午夜亚洲专区-少妇人妻综合久久蜜臀-国产成人户外露出视频在线-国产91传媒一区二区三区

當前位置:主頁 > 科技論文 > 建筑工程論文 >

受限面對不同尺寸XPS豎向燃燒的影響探究

發布時間:2018-05-07 15:11

  本文選題:擠塑聚苯乙烯 + 豎向燃燒; 參考:《消防科學與技術》2017年10期


【摘要】:為了探究受限面對不同尺寸XPS豎向燃燒的影響,利用自制豎向燃燒試驗平臺,分別對臨空與一面貼壁兩種工況下五種寬度的XPS進行豎向燃燒試驗。研究發現,寬度為5.0、7.5、10.0、12.5 cm時,貼壁的火焰高度、熱解速率、總體質量損失率、熱釋放速率均大于臨空,并且隨著寬度的增大,差值越來越小。寬度為15.0 cm時,貼壁的相關參數小于臨空,但相差不大。研究證明,受限面能夠?qū)π〕叽绲呢Q向火蔓延起到促進作用。隨著寬度增大,預熱區傳熱方式變化,受限面的促進作用逐漸降低。
[Abstract]:In order to investigate the effect of different sizes of XPS on vertical combustion, the vertical combustion tests of five widths of XPS were carried out under two operating conditions, namely, near air and side wall, using a self-made vertical combustion test platform. It is found that the flame height, pyrolysis rate, total mass loss rate and thermal release rate of the adherent are higher than those of the air when the width is 5.0 ~ 7.5 ~ 10.0 ~ 12.5 cm, and the difference becomes smaller and smaller with the increase of the width. When the width is 15.0 cm, the relative parameters of the adherent wall are smaller than that of the sky, but the difference is not significant. It is proved that the confined surface can promote the vertical fire spread in small size. With the increase of width, the heat transfer mode of preheating zone changes and the promotive effect of confined surface decreases gradually.
【作者單位】: 廣州市消防支隊;
【分類號】:TU551;TU998.1

【相似文獻】

相關期刊論文 前6條

1 杜書廷;何文軍;;聚氨酯灌注XPS復合面板外墻外保溫技術性能及應用[J];施工技術;2008年02期

2 蘇清濡;;XPS在倒置式保溫屋面中的應用[J];福建建設科技;2006年05期

3 全永文;擠塑聚苯乙烯硬質泡沫塑料在屋頂?shù)膽?yīng)用[J];中國建材;1997年03期

4 劉利軍;;復合保溫(XPS)板外墻自保溫體系在節能建筑工程中的應用[J];中外建筑;2011年12期

5 張曉革;邵文斗;王永志;;XPS保溫隔熱板倒置屋面施工工藝[J];建筑工人;2008年12期

6 鄭大鋒;邱學青;樓宏銘;;XPS測定減水劑吸附層厚度[J];化工學報;2008年01期

,

本文編號:1857413

資料下載
論文發表

本文鏈接:http://sikaile.net/jianzhugongchenglunwen/1857413.html


Copyright(c)文論論文網All Rights Reserved | 網站地圖 |

版權申明:資料由用戶5e904***提供,本站僅收錄摘要或目錄,作者需要?jiǎng)h除請E-mail郵箱bigeng88@qq.com