本文選題：磚砌體　切入點：壓剪破壞　出處：《建筑材料學報》2017年04期

【摘要】：為了確定等效體積單元(RVE)模型中磚砌體材料的破壞準則,選取3種組砌方式、2種灰縫厚度和10種壓應力水平,通過特別設計的夾具對144個磚砌體試件進行了壓剪破壞試驗.綜合考慮試驗結果和數值模擬對破壞面光滑性的要求,發現Drucker-Prager準則可用于描述磚砌體材料的壓剪破壞,其參數可由試驗結果進行標定.將標定后的Drucker-Prager準則應用于RVE模型,對磚砌體試件抗壓試驗和磚砌體墻偽靜力試驗進行了數值模擬,模擬結果與試驗結果相符.研究手段和成果可為磚砌體材料或結構的數值分析提供參考.
[Abstract]:In order to determine the failure criterion of brick masonry material in the equivalent volume unit (RVE) model, the compression shear failure tests of 144 brick masonry specimens were carried out by means of specially designed clamps, two kinds of ash joint thickness and 10 kinds of compressive stress levels were selected.Considering the test results and the requirements of numerical simulation for the smoothness of the failure surface, it is found that the Drucker-Prager criterion can be used to describe the compressive and shear failure of brick masonry materials, and its parameters can be calibrated by the test results.The calibrated Drucker-Prager criterion is applied to the RVE model. The compressive tests of brick masonry specimens and pseudostatic tests of brick masonry walls are numerically simulated. The simulation results are in good agreement with the experimental results.The research methods and results can provide a reference for the numerical analysis of brick masonry materials or structures.
【作者單位】： 上海理工大學環境與建筑學院;同濟大學結構工程與防災研究所;
【基金】：國家自然科學基金資助項目(51208300)
【分類號】：TU522

【相似文獻】

相關碩士學位論文 前1條

1 彭立磊;農作物秸稈再生保溫磚砌體基本物理力學性能試驗研究[D];鄭州大學;2016年

，

本文編號：1686817