基于Cortex-M3和互聯網的分布式測試系統設計
發布時間:2018-11-21 07:17
【摘要】:介紹了以Cortex-M3微處理器為核心、基于互聯網的分布式測試系統,分析了系統的各部分功能。提出了分布式測試系統總體設計框架以及設計原則。并分別給出了分布式測試系統中主控制器模塊、模擬輸入輸出模塊和以太網接口電路模塊等的硬件設計和該測試系統平臺的軟件模塊設計。其中包括嵌入式軟件和CPLD控制模塊軟件的設計。通過反復實驗測試,該分布式測試系統運行效果極佳,能非�?煽康倪M行數據采集、控制、傳輸,采樣率和采樣精度也達到預期值。
[Abstract]:This paper introduces a distributed testing system based on Internet with Cortex-M3 microprocessor as the core, and analyzes the functions of each part of the system. The overall design framework and design principles of distributed test system are presented. The hardware design of the main controller module, analog input and output module and Ethernet interface circuit module in the distributed test system and the software module design of the test system platform are given respectively. Including embedded software and CPLD control module software design. Through repeated experiments, the distributed test system has a very good running effect, and it can be used for data acquisition, control, transmission, sampling rate and sampling precision to reach the expected value.
【作者單位】: 太原理工大學信息工程學院;
【分類號】:TP274;TP368.11;TP393.09
[Abstract]:This paper introduces a distributed testing system based on Internet with Cortex-M3 microprocessor as the core, and analyzes the functions of each part of the system. The overall design framework and design principles of distributed test system are presented. The hardware design of the main controller module, analog input and output module and Ethernet interface circuit module in the distributed test system and the software module design of the test system platform are given respectively. Including embedded software and CPLD control module software design. Through repeated experiments, the distributed test system has a very good running effect, and it can be used for data acquisition, control, transmission, sampling rate and sampling precision to reach the expected value.
【作者單位】: 太原理工大學信息工程學院;
【分類號】:TP274;TP368.11;TP393.09
【參考文獻】
相關期刊論文 前2條
1 李鳳保,古天祥,沈艷;基于Ethernet的網絡化測試技術研究[J];儀器儀表學報;2001年S2期
2 孟晨;羅錦;;分布式網絡化測試系統設計[J];火力與指揮控制;2006年05期
【共引文獻】
相關期刊論文 前10條
1 李鳳保,劉志耘,古天祥;網絡化測量系統的獨立平臺結構[J];計算機應用;2002年04期
2 李杰,馬建國,李群山;基于PXI總線的分布式網絡化測控系統[J];計算機測量與控制;2003年06期
3 劉金寧,孟晨,楊鎖昌,陳德祥;網絡化測試技術綜述[J];計算機測量與控制;2003年08期
4 周文建,白泰禮,王平;網絡化測試系統的時鐘同步[J];實驗科學與技術;2005年02期
5 周文建,白泰禮,古天祥;網絡化實驗的設計和實現[J];實驗科學與技術;2005年S1期
6 楊坤明;測控系統虛擬儀器網絡設計[J];微計算機信息;2005年15期
7 李鳳保,李凌,王曉東;基于虛擬儀器的網絡化測控系統[J];儀器儀表學報;2004年S2期
8 胡兵,陳光,
本文編號:2346290
本文鏈接:http://sikaile.net/guanlilunwen/ydhl/2346290.html
最近更新
教材專著