【摘要】：當前互聯網技術發展迅速,新型網絡協議的不斷出現,要求網絡轉發設備能夠及時提供對新協議的支持.目前,軟件定義網絡要兼顧可編程協議解析和數據轉發性能仍然面臨諸多困難.對此,本文提出了基于解析和執行聯動結構的可編程數據平面(CLIPE),通過在硬件的解析器上部署用戶可定義模塊,可實時更新硬件中解析邏輯中的協議多叉樹,從而實現協議解析的用戶定制性;并且,通過解析器和動作執行器聯動的創新結構,減少了整個處理架構的冗余性,從而減小動作執行時延,提高了硬件資源利用率,與現有方案相比,節約了11%的邏輯資源和24%的BRAM資源.最后,本文基于NetFPGA-10G板卡完成了本方案的原型機實現.
[Abstract]:With the rapid development of Internet technology and the emergence of new network protocols, network forwarding devices are required to provide timely support for the new protocols. At present, the software definition network still faces many difficulties to combine the performance of programmable protocol parsing and data forwarding. In this paper, a programmable data plane (CLIPE), based on parse and execution linkage structure is proposed. By deploying user-defined modules on the parser of the hardware, the protocol multitree in the parse logic can be updated in real time. In order to realize the customization of protocol parsing; In addition, through the innovative structure of the linkage of the parser and the action actuator, the redundancy of the whole processing architecture is reduced, and the delay of action execution is reduced, and the utilization rate of hardware resources is improved. It saves 11% logical resources and 24% BRAM resources. Finally, the prototype of this scheme is implemented based on NetFPGA-10G card.
【作者單位】： 國家數字交換系統工程技術研究中心;
【分類號】：TP393.0

【相似文獻】

相關碩士學位論文 前1條

1 李健;基于OpenStack的可編程數據轉發平面構建[D];北京郵電大學;2015年

，

本文編號：2302372