本文選題：MPLS + 測試　； 參考：《西安電子科技大學》2014年碩士論文

【摘要】：互聯網的飛速發展，帶來網絡擴張的同時，也給網絡發展帶來了更多的挑戰，對于網絡設備高效、穩定、可靠的需求也提到了一個新的高度。對于各大廠商不僅僅要考慮如何設計高性能的網絡設備，更要考慮網絡設備本身質量問題。如何測試網絡設備的各項性能，成為網絡設備生產的一個重要環節。 本文的主要內容基于在H3C公司項目經驗。首先，從性能、功能性和穩定性三個方面，提出了MPLS模塊中關鍵技術——GR技術的需求分析，并確定各項性能的測試目標和標準；其次，根據實際測試環境和設備，選擇黑盒測試作為GR技術的測試方法和思路；再次，以覆蓋GR技術需求、遍及GR性能指標和功能點為原則，設計詳細的測試用例；第四，，根據測試用例，搭建適合的測試環境，采用VTP測試平臺進行設備遠程登錄與命令配置。第五，在所搭建的測試環境中，嚴格按照測試用例中的測試步驟，進行手動測試和自動化測試操作；最后，通過多對測試結果和預期結果的對比分析，得出測試結論。 MPLS網絡中GR技術的測試結果表明，GR技術的功能性和穩定性均能滿足用戶的需求，為MPLS網絡傳輸提供了可靠穩定的保證。其性能也為用戶提供能良好的體驗。
[Abstract]:The rapid development of the Internet brings the network expansion, but also brings more challenges to the network development. It also raises a new height for the demand of high efficiency, stability and reliability of the network equipment. For major manufacturers, not only how to design high performance network equipment, but also the quality of network equipment should be considered. How to test the performance of network equipment has become an important link in network equipment production. The main content of this paper is based on project experience in H3C Company. First of all, from three aspects of performance, functionality and stability, the requirement analysis of gr technology in MPLS module is put forward, and the test targets and standards of each performance are determined. Secondly, according to the actual test environment and equipment, The black box test is chosen as the test method and train of thought of gr technology. Thirdly, the detailed test cases are designed on the principle of covering gr technical requirements, all over gr performance indexes and function points. Fourthly, according to the test cases, a suitable test environment is built. VTP test platform is used for remote login and command configuration. Fifth, in the built test environment, according to the test steps in the test cases, manual testing and automated testing operations are carried out. Finally, the test conclusions are obtained by comparing the test results with the expected results. The test results of gr technology in MPLS network show that the functionality and stability of gr technology can meet the needs of users and provide a reliable and stable guarantee for MPLS network transmission. Its performance also provides a good experience for users.
【學位授予單位】：西安電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TP393.05

【參考文獻】

相關期刊論文 前10條

1 郭雄輝,趙保華,周顥,屈玉貴;基于構造類別代數的數據流和控制流相結合的協議測試[J];北京郵電大學學報;2003年S2期

2 馬志軍,秦洪;MPLS技術研究及其應用[J];電信快報;2002年07期

3 田輝,何寶宏;MPLS測試技術[J];電信網技術;2003年02期

4 曹吉龍;;計算機網絡的可靠性優化[J];電子世界;2012年09期

5 安建強;未來IP網絡的核心技術——MPLS[J];廣西通信技術;2001年03期

6 伏西平;王寶生;陳曉梅;蘇金樹;;面向ForCES路由器結構的BGP Graceful Restart技術研究[J];計算機工程與科學;2006年07期

7 范曉勃,林闖,吳建平,徐恪;分布式路由器的性能模型與分析[J];計算機學報;1999年11期

8 李寧;李戰懷;;基于黑盒測試的軟件測試策略研究與實踐[J];計算機應用研究;2009年03期

9 周景耀;多協議標簽交換技術的應用及發展研究[J];制造業自動化;2005年07期

10 蘭瑜;;ISO網絡體系結構[J];科技信息;2008年35期

本文編號：1986661