本文選題：Parlay + X　； 參考：《南京郵電大學》2014年碩士論文

【摘要】：開放業務接口是NGN的一大優勢，為提高電信運營商的效益和用戶網絡體驗，開放業務接口成為業內關注和研究的熱點。廣大Web應用開發者可通過Web接口使用電信網絡的能力，也加快了第三方服務和應用提供商的開發速率。Parlay X架構的出現引起了廣泛的注意，通過Web ServiceAPIs為應用提供網絡會話控制能力。 首先，介紹了NGN多業務通信與交換平臺的關鍵技術的研究背景以及研究目的和意義，，闡述了SOA相關技術的發展歷程，結合當前研究現狀提出本文的研究方向。 其次，綜述了NGN多業務通信與交換平臺的關鍵技術所需要的技術和理論思想，對ParlayX網關過載控制技術進行了研究，并結合前人研究成果提出了一種基于消息的過載控制算法。該算法結合Parlay X架構特點和消息類型，對消息的進行優先級設置，并結合負載均衡和接入控制算法，利用相關過載變量，控制消息發送數量，從而對網關進行過載控制。仿真實驗表明，相比于傳統的過載控制算法，本算法能保證更大的吞吐量和更少的平均服務時間。 最后，在上述研究的基礎上，分析了Parlay X所在環境的總體架構，網關接口，詳細設計了Parlay X網關所需的各個模塊，并對網關的實現進行詳細介紹。之后，以VS2010為開發平臺，使用C++開發語言，MySql作為數據庫，實現并測試了該系統。
[Abstract]:Open service interface is one of the advantages of NGN. In order to improve the efficiency of telecom operators and user network experience, open service interface has become the focus of attention and research in the industry. The ability of Web application developers to use telecommunication networks through Web interfaces has also accelerated the development rate of third-party services and application providers. Parlay X architecture has attracted widespread attention. Web ServiceAPIs provides network session control for applications. Firstly, this paper introduces the research background, purpose and significance of the key technologies of NGN multi-service communication and switching platform, expounds the development course of SOA related technologies, and puts forward the research direction of this paper combined with the current research situation. Secondly, this paper summarizes the key technologies and theoretical ideas of NGN multi-service communication and switching platform, studies the overload control technology of ParlayX gateway, and proposes a message-based overload control algorithm combined with the previous research results. Combined with the characteristics of Parlay X architecture and message types, the algorithm sets the priority of messages, and combines the load balancing and access control algorithms, using the relevant overload variables to control the number of messages sent, so as to control the gateway overload. Simulation results show that compared with the traditional overload control algorithm, the proposed algorithm can guarantee greater throughput and less average service time. Finally, on the basis of the above research, the overall architecture and gateway interface of Parlay X are analyzed, and the modules needed for Parlay X gateway are designed in detail, and the implementation of the gateway is introduced in detail. After that, the system is implemented and tested with VS2010 as the development platform and C development language, MySQL, as the database.
【學位授予單位】：南京郵電大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TP393.09;TN915.05

【參考文獻】

相關期刊論文 前6條

1 陳燕勇;基于JAIN APIs的智能網技術[J];電信建設;2004年06期

2 曾蒸;;下一代網絡NGN技術探析[J];重慶工學院學報(自然科學版);2007年09期

3 翟少東;黃芳;張力軍;;基于IMS的NGN及網絡融合方案[J];電信快報;2006年09期

4 楊飛,李曉峰,陳俊亮;Parlay技術及其應用[J];電信網技術;2001年01期

5 盧華;王保保;;oSIP協議棧的研究及應用[J];電子科技;2006年02期

6 田森平;祝亞玲;;Parlay X業務開發模型的研究與實現[J];微計算機信息;2006年30期

本文編號：1904385