本文選題：10G + FCOE��； 參考：《電子科技大學》2014年碩士論文

【摘要】：隨著科技日益發展,各類高新技術蓬勃壯大,計算機網絡技術也隨之迅速發展。然而,由于各種服務的相應發展,對于日新月異的網絡技術速率,穩定性等要求也隨之變高。比如存儲區域網絡的存儲技術所要求的速率早已不滿足于之前的2G,4G等速率,現在所要求的速率已經達到了10G。并且對于存儲區域網絡的CNA適配卡要求融合以太網技術,出現了FCOE技術。FCOE(FCOE:Fiber Channel over Ethernet)技術是使傳輸數據基于FC協議內容,封裝在以太網幀頭,通過以太網傳輸?shù)囊环N協議標準。然而如今,大量網絡協議共存,同一計算機PCIE插槽有限,使一個網絡適配器可以同時處理多種協議可以提高便利性,減少使用的適配器數量,網絡線纜數量。CNA適配卡就是基于FCOE技術,融合網卡設備驅動標準程序,可以同時處理FC協議棧的數據,又可以處理TCP協議棧的數據的一種網絡適配器。CNA適配卡基于以上,可以與以太網交換機,FCOE交換機互連,實現數據10G高速傳輸,并且可以通過FCOE協議,成功登陸大容量磁盤設備。CNA適配卡同時通過SCSI-FCP模塊登陸磁盤后對磁盤進行操作,成功實現高速率的存儲操作。CNA適配卡在驅動程序中會對存儲類協議和TCP協議棧協議進行識別并分開處理,實現了集多種功能于一體的高速率網絡適配卡。通過教研室的現有設備和技術,本文主要研究了存儲類協議,標準以太網適配器驅動,并基于此實現的10G CNA適配卡的驅動程序,并進行了測試。本文中的10G CNA適配卡硬件部分是采用的教研室的Altera開發板,驅動部分是基于Linux內核開發。本文對FCOE協議等各類存儲類協議以及適配卡融合標準以太網的關鍵技術進行分析,并實現。通過按照嚴格要求搭建的互連平臺,對10G CNA適配卡進行了測試,各類指標均達到了預期目標。
[Abstract]:With the development of science and technology, all kinds of high and new technologies are booming, and the computer network technology is developing rapidly. However, due to the corresponding development of various services, the requirements of the fast changing network technology rate and stability have also become higher. For example, the rate required by storage area network storage and storage technology has long been not satisfied with the previous 2. The rate of G, 4G, and so on, the rate required now has reached 10G. and the CNA adapter card for the storage area network requires the integration of Ethernet technology. The FCOE technology.FCOE (FCOE:Fiber Channel over Ethernet) technology is a protocol label that enables the transmission data to be based on the FC protocol content, encapsulated in the Ethernet frame head, and transmitted through Ethernet. However, today, a large number of network protocols coexist, the same computer PCIE slot is limited, so that a network adapter can deal with multiple protocols at the same time to improve convenience and reduce the number of adapters used. The number of network cable number.CNA adapter is based on FCOE technology, integrated network card device driver standard program, and can handle FC protocol at the same time The data of the stack, which can also handle the data of the TCP protocol stack, is based on the adapter.CNA adapter card, which can be interconnected with the Ethernet switch and the FCOE switch to achieve the high speed transmission of the data 10G, and the FCOE protocol can successfully land the large capacity disk equipment.CNA adapter card and login to the magnetic disk through the SCSI-FCP module and the magnetic field. The.CNA adapter card can recognize and separate the storage class protocol and the TCP protocol stack in the driver, and realize the high speed network adapter with various functions. Through the existing equipment and techniques in the teaching and Research Office, the paper mainly studies the storage class protocol and the standard. Ethernet adapter driver, and based on this implementation of 10G CNA adapter driver, and testing. In this paper, the 10G CNA adapter hardware part is the Altera development board used in the teaching and research room, the driver is based on the Linux kernel development. This paper is based on the FCOE protocol and other types of storage and storage protocols and adapter card fusion standard Ethernet The key technologies are analyzed and implemented. The 10G CNA adapter card is tested by the strict requirements set up on the interconnection platform. All the indicators have reached the expected target.
【學位授予單位】：電子科技大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TP393.11

【共引文獻】

相關期刊論文 前1條

1 袁海軍;段美霞;;基于TUN/TAP的非標卡虛擬化實現[J];硅谷;2015年03期

相關碩士學位論文 前10條

1 趙志杰;多功能火災報警樓層顯示器的設計與實現[D];華中科技大學;2011年

2 唐海濤;被動定位浮標通信及信號處理平臺硬件設計[D];哈爾濱工程大學;2011年

3 于曉飛;基于ARM的嵌入式實時操作系統的設計與開發[D];遼寧科技大學;2009年

4 鄧銀華;可移動式紅外視頻監控系統的設計與實現[D];武漢理工大學;2012年

5 徐鵬;基于ARM的圖像采集系統設計[D];哈爾濱理工大學;2013年

6 胡也;基于WIFI的陣列式表面肌電信號采集與傳輸[D];浙江大學;2014年

7 孫甲凱;基于ARM的汽車導航系統設計[D];中北大學;2014年

8 于凡;嵌入式電源管理關鍵技術的研究與實現[D];西安電子科技大學;2014年

9 丁傳新;Linux系統下U盤控制與管理系統的設計與實現[D];國防科學技術大學;2012年

10 黃振華;數字化能譜檢測系統研究[D];重慶大學;2014年

，

本文編號：1900151