本文選題：嵌入式系統 + 嵌入式Internet��； 參考：《山東理工大學》2008年碩士論文

【摘要】： 以嵌入式微處理器和嵌入式操作系統為核心的嵌入式技術,已在很多領域得到了廣泛的應用。由于互聯網的應用日益普及,信息共享的程度不斷提高,傳統的串行通訊和并行通訊方式的缺點日益凸出,嵌入式設備的網絡化已經成為網絡發展的必然趨勢。Forrester Research的研究顯示,到2010年,將有95%的連網設備不再是傳統的計算機,而是帶網絡功能的嵌入式系統。 本文根據在PC104系統下實現網絡通信功能的成功案例,構建了基于ARM7微處理器和uCLinux操作系統的實驗平臺,完成了網絡接口設計,并實現了嵌入式系統的網絡通信功能。 本文采用PHILIPS公司的LPC2210微控制器作為主控芯片,采用高度集成的以太網芯片RTL8019AS作為網絡接口。選擇Linux操作系統進行裁剪和移植,分析并實現了嵌入式TCP/IP協議棧。編寫了底層網絡驅動程序,實現了嵌入式硬件平臺和PCLinux系統之間的基于網絡的數據傳輸;同時實現了嵌入式系統同WindowsXP系統之間的基于網絡的數據傳輸;通過對比實驗,對網絡數據傳輸協議和算法進行了研究和優化,完善了ARM嵌入式系統的網絡功能。 大量的數據傳輸及可靠性測試實驗表明,本文所設計的嵌入式系統網絡功能在可靠性、可用性及操作方便性方面都達到了預期的目標,具有實際的應用價值!
[Abstract]:Embedded technology based on embedded microprocessor and embedded operating system has been widely used in many fields. As the application of Internet is becoming more and more popular, the degree of information sharing is increasing, the shortcomings of traditional serial communication and parallel communication are becoming more and more obvious, and the network of embedded devices has become the inevitable trend of network development. Forrester Research research shows that, By 2010, 95% of networking devices will be embedded systems with network capabilities instead of traditional computers. According to the successful cases of network communication in PC104 system, the experiment platform based on ARM7 microprocessor and uCLinux operating system is constructed, the network interface design is completed, and the network communication function of embedded system is realized. In this paper, the LPC2210 microcontroller of PHILIPS Company is used as the main control chip, and the highly integrated Ethernet chip RTL8019AS is used as the network interface. The embedded TCP/IP protocol stack is analyzed and implemented by selecting Linux operating system for cutting and transplanting. The underlying network driver is written to realize the network-based data transmission between the embedded hardware platform and the PCLinux system, and the network-based data transmission between the embedded system and the WindowsXP system is realized. The network data transmission protocol and algorithm are studied and optimized, and the network function of ARM embedded system is improved. A large number of data transmission and reliability testing experiments show that the embedded system network function designed in this paper has achieved the expected goal in reliability, usability and ease of operation, and has practical application value!
【學位授予單位】：山東理工大學
【學位級別】：碩士
【學位授予年份】：2008
【分類號】：TP368.12

【引證文獻】

相關期刊論文 前1條

1 石勇;鄒永龍;季國良;朱明;王刃;;淺談配電箱門鎖管理系統的設計與應用[J];中國電業(技術版);2011年12期

相關碩士學位論文 前2條

1 王燕;嵌入式家居環境網絡監控系統的設計與實現[D];西安科技大學;2010年

2 陳琳;基于嵌入式系統的電力光纖信號分析儀軟件的設計與實現[D];電子科技大學;2012年

，

本文編號：1889440