本文選題：質量管理　切入點：質量管理網絡　出處：《合肥工業大學》2014年碩士論文

【摘要】：隨著生產力的飛速發展，人們逐漸提出了對產品及服務質量的需求，質量管理已經成為企業一項不可或缺的管理活動；同時，由于計算機技術及其網絡技術的高速進步，，基于網絡化的質量管理勢在必行。日本、美國的質量管理水平處于國際領先水準，而正是由于較早及高度給予質量管理重視，日本才能在二戰以后迅速復蘇并躋身世界強國。我國引入質量管理相對較晚，目前在質量管理水平上處于相對落后狀態，相信屢次出現的質量問題必能給國內企業敲響警鐘并全面掀起質量管理的浪潮！ 本文從構建質量管理網絡入手，開發了一套基于W5100的串口轉以太網模塊，即本文詳細介紹的網絡集中器。網絡集中器通過四路串口接收測量數據并按照特定需求將測量數據處理為質量信息進行存儲及轉發，同時給出了基于該網絡集中器的企業內部質量管理網絡架構，為工業現場大量存在的以RS232/RS485作為通信接口的測量儀器組建質量管理網絡提供了一種解決方案。 同時，筆者為網絡集中器開發了相對完整的上位機程序：參數配置軟件為用戶的使用提供便利；TCP/IP網絡數據收集軟件進行了質量信息的excel及AQDEF文件格式的存儲，方便了后續質量信息分析與管理；AQDEF文件格式轉換與存儲軟件則可以方便用戶直接使用Q-DAS質量管理軟件，同時也為本系統提供可靠地數據格式支持；質量信息分析與管理軟件可以實時地對制程進行監控，實現了簡單地質量管理功能。
[Abstract]:With the rapid development of productivity, people gradually put forward the demand for the quality of products and services, quality management has become an indispensable management activity of enterprises, at the same time, because of the rapid progress of computer technology and network technology, Quality management based on network is imperative. The quality management level in Japan and the United States is in the leading level in the world, and it is precisely due to the early and high attention to quality management. Only after World War II can Japan recover rapidly and become a world power. China introduced quality management relatively late and is relatively backward in quality management at present. I believe that the repeated quality problems will be able to ring the alarm bell for domestic enterprises and set off a wave of quality management! Starting with the construction of quality management network, a serial port to Ethernet module based on W5100 is developed in this paper. That is the network concentrator, which is introduced in detail in this paper. The network concentrator receives the measurement data through four serial ports and processes the measurement data as quality information to store and forward according to the specific requirements. At the same time, the internal quality management network architecture based on the network concentrator is presented, which provides a solution for the establishment of the quality management network based on the measurement instruments with RS232/RS485 as the communication interface in the industrial field. At the same time, the author has developed a relatively complete host computer program for the network concentrator: parameter configuration software provides convenience for users to use the TCP / IP network data collection software to store quality information in excel and AQDEF file format. It is convenient for the subsequent quality information analysis and management to convert and store the file format of AQDEF, which is convenient for users to use the Q-DAS quality management software directly, and also provides reliable data format support for the system. The quality information analysis and management software can monitor the process in real time and realize the simple quality management function.
【學位授予單位】：合肥工業大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TP393.07

【參考文獻】

相關期刊論文 前10條

1 申應海,沈承林;質量管理信息系統的設計與實現[J];北京化工大學學報(自然科學版);2003年01期

2 王裕如,袁愛進,呂艷玲;嵌入式產品實現以太網接入及TCP/IP協議棧[J];儀器儀表用戶;2003年06期

3 李東鋒;卓越之路——我國企業質量管理信息化現狀及發展趨勢研究[J];電子質量;2004年04期

4 匡竹平,尤建新,杜學美;汽車制造企業制造過程質量管理信息系統的研究與開發[J];工業工程與管理;2005年02期

5 陳禾;張穎;林立;陸兆峰;;基于μC/OS-Ⅱ的嵌入式網絡數據采集模塊的設計[J];湖北民族學院學報(自然科學版);2006年02期

6 王建兵,姚加飛,陳進;大型建筑企業質量管理信息網絡化研究[J];重慶建筑大學學報;2000年05期

7 趙逢禹,徐濟超,馬義中,劉玉敏;統計過程控制(SPC)軟件的設計[J];計算機工程與應用;2000年06期

8 張欣,王兵,徐建民;基于網絡遠程通用監控系統設計與實現[J];計算機工程與應用;2002年08期

9 劉明周,任蘭,張銘鑫;產品質量統計過程中的制造質量數據管理方法研究[J];計算機集成制造系統;2005年02期

10 蔡林沁,謝閱,馬紹良;統計過程控制分析與管理系統[J];計算機應用研究;2004年05期

本文編號：1664593