本文關鍵詞： 云監控 對等監控網絡 云平臺 分布式存儲集群　出處：《計算機應用》2015年12期 　論文類型：期刊論文

【摘要】：為解決傳統方案中單節點帶來的性能瓶頸和低可靠性問題,基于對等監控網絡設計并實現了云監控系統解決方案。在硬件部署上,該解決方案將監控節點封裝在應用容器中,分布式部署在不同機架上,組建對等的監控網絡;監控節點間采用非關系型數據庫構建分布式存儲集群,實現了監控數據的異地訪問和備份。在軟件實現上,該解決方案進行了分層設計,采用推拉結合的方式收集數據,對采集的數據進行可信度評估和分布式存儲,使用閾值控制和主機空閑評估相結合的策略對云中主機進行智能化管控。通過系統測試,發現該監控系統對計算資源的平均占用率僅有2.17%;而1 ms內響應讀寫請求的平均比率達到93%以上,表明該解決方案具有資源消耗率低、高頻次讀寫效率高的性能優勢。
[Abstract]:In order to solve the performance bottleneck and low reliability problems caused by single node in traditional solutions, a cloud monitoring system solution based on peer-to-peer monitoring network is designed and implemented. The solution encapsulates the monitoring node in the application container and distributes it on different frames to build a peer-to-peer monitoring network. Monitoring nodes use non-relational database to construct distributed storage cluster, which realizes remote access and backup of monitoring data. In software implementation, the solution is designed in a hierarchical way. The data is collected by the combination of push and pull, and the reliability of the collected data is evaluated and distributed storage is carried out. The strategy of combining threshold control and host idle evaluation is used to intelligently control the host in the cloud. Through the system test, it is found that the average utilization rate of the monitoring system for computing resources is only 2.17; The average rate of response to read / write request in 1 Ms is over 93%, which indicates that the solution has the advantages of low resource consumption and high frequency reading and writing efficiency.
【作者單位】： 空軍工程大學信息與導航學院;
【分類號】：TP393.06
【正文快照】： 0引言隨著云計算技術的迅猛發展,針對大規模云集群進行及時有效的管理變得越來越重要。云監控系統,是針對云資源進行動態監控的有效工具。該系統主要由監測和管控兩大部分構成。數據監測一般采用分別在監控節點和被監控節點中運行守護進程的方式加以實現[1]。監測的數據包括硬

【參考文獻】

相關期刊論文 前1條

1 王學龍;張t，

本文編號：1450213