本文選題：倉儲物流 + 出入庫系統�。� 參考：《山東大學》2017年碩士論文

【摘要】：對于制造企業而言,倉儲物流是企業物流中至關重要的內容。對倉儲系統進行優化,可以有效地提高企業整體物流效率。日化用品行業的訂單具有著多品種、小批量的特點,其倉儲出入庫的效率對整體物流與供應鏈效率會產生著直接的影響。本文的研究對象為B日化用品制造企業的倉儲出入庫系統,為解決出庫備貨區存在的堆積問題,提出一種依裝車順序取貨的倉儲出入庫系統方案。這種方案是從改善出庫備貨區貨物放置規則和改進貨物裝車流程兩個角度出發,以期達到提高倉儲出入庫系統效率的優化目的。首先,本文對B日化用品制造企業的現狀進行分析,在日化用品行業現狀分析和B公司物流現狀、供應鏈現狀分析的基礎上,指出B公司倉儲出入庫系統現存問題,即出庫備貨區環節的堆積問題。為解決這一問題,提出依裝車順序取貨的倉儲出入庫系統優化方案。然后,根據B公司的倉儲出入庫業務流程,利用Petri網對倉儲出入庫流程進行作業流程梳理,為下文仿真建模提供依據。其次,應用三維仿真軟件,對B日化用品制造企業的四種產品的倉儲出入庫系統情況進行仿真建模。利用LoadMaster裝箱大師軟件對貨物裝車問題進行仿真,得出最大化裝車率下的最優裝車方案。在此基礎上,利用Flexsim軟件對優化前后的倉儲出入庫系統進行仿真。在其他條件不變的情況下,將原先裝車人員按裝車順序取貨的方案優化為倉儲出入庫系統直接按照裝車順序從立庫中進行取貨的方案,并對原倉儲出入庫系統的出庫輸送線、出庫備貨區、裝車人員進行資源整合。最后,對利用Flexsim仿真建模優化前后的仿真運行結果進行分析,對比優化前后的設備及人員的狀態比率。根據仿真對比結果,優化后的倉儲出入庫系統整體運行時間縮短,出庫備貨區堆積現象得到緩解,出庫傳送帶利用率提高,人員得以精簡,倉儲出入庫效率提高。
[Abstract]:For manufacturing enterprises, warehousing logistics is an important part of enterprise logistics.Optimization of warehousing system can effectively improve the overall logistics efficiency of enterprises.The order of daily chemical products industry has the characteristics of many varieties and small quantities. The efficiency of storage and storage has a direct impact on the efficiency of the whole logistics and supply chain.The research object of this paper is the storage and entry and storage system of B daily chemical products manufacturing enterprise. In order to solve the problem of stacking in the storage and storage area, this paper puts forward a kind of storage and entry and storage system scheme which takes goods in the order of loading.This scheme is based on the two aspects of improving the rules of goods placement and the loading flow of goods in the storage and storage area in order to improve the efficiency of the warehousing and warehousing system.First of all, this paper analyzes the current situation of B daily chemical products manufacturing enterprises, on the basis of the analysis of the current situation of daily chemical products industry, B company logistics status, supply chain status analysis, points out the existing problems of B company warehousing and storage system.That is, the storage and storage area of the accumulation of links.In order to solve this problem, the optimization scheme of warehousing and warehousing system is put forward.Then, according to the business process of B company, we use Petri net to sort out the process of warehouse entry and exit, which provides the basis for the simulation modeling below.Secondly, three dimensional simulation software is used to simulate the storage and storage system of four kinds of products in B daily chemical products manufacturing enterprise.The LoadMaster loading master software is used to simulate the cargo loading problem, and the optimal loading scheme under the maximum loading rate is obtained.On this basis, the Flexsim software is used to simulate the storage system before and after optimization.When other conditions are unchanged, the original scheme of loading personnel to pick up goods in the order of loading is optimized as the scheme of the warehousing, outgoing and warehousing system to carry out the goods directly from the vertical warehouse in accordance with the loading order, and for the delivery line of the original warehousing and outgoing storage system,Loading area, loading personnel to carry out the integration of resources.Finally, the simulation results before and after optimization using Flexsim simulation modeling are analyzed, and the state ratio of equipment and personnel before and after optimization is compared.According to the results of simulation, the whole running time of the system is shortened, the stacking phenomenon in the storage and storage area is alleviated, the utilization ratio of the outgoing conveyor belt is improved, the personnel is streamlined, and the efficiency of the storage and incoming storage is improved.
【學位授予單位】：山東大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP391.9

【相似文獻】

相關重要報紙文章 前5條

1 本報記者 劉葉琳;日化用品大玩概念隱性漲價[N];國際商報;2012年

2 記者 周峰 通訊員 王華闖　　　　　;菜籃子變輕了 部分日化用品漲價[N];嘉興日?qǐng)?bào);2012年

3 記者 關鍵　彭晨 實習生 王騰;本報記者調查日化用品漲價[N];深圳商報;2011年

4 本報記者 朱蓓寧;日化用品按需選購莫浪費[N];南通日?qǐng)?bào);2011年

5 趙英淑;三項技術讓你喝上放心水[N];科技日?qǐng)?bào);2013年

相關碩士學位論文 前2條

1 李璇;B日化用品制造企業倉儲出入庫系統仿真優化研究[D];山東大學;2017年

2 歐陽玉子;自選超市模式下的日化用品包裝設計[D];湖南工業大學;2013年

，

本文編號：1761175