【摘要】：目的以考慮易損件的懸掛系統為對象,研究跌落沖擊條件下易損件響應規律。方法建立系統無量綱動力學模型,利用四階龍格庫塔法分析易損件的位移和加速度響應。討論系統懸掛角、頻率比、阻尼比和無量綱沖擊速度等參數對易損件位移、加速度響應的影響。結果系統的懸掛角、頻率比以及主體與基礎連接處的阻尼對易損件響應影響顯著,隨著系統懸掛角的增加,易損件加速度響應幅值增加,位移響應幅值減少,響應周期縮短。增加頻率比可有效抑制易損件響應幅值。結論在跌落沖擊條件下,懸掛系統的設計應選擇適當?shù)膽覓旖�、頻率比等相關參數,以滿足產品防護的需要。
[Abstract]:Aim to study the response law of vulnerable parts under drop impact by taking the suspension system considering the breakable parts as an object. Methods the dimensionless dynamic model of the system was established and the displacement and acceleration responses of the vulnerable parts were analyzed by the fourth order Runge-Kutta method. The effects of suspension angle, frequency ratio, damping ratio and dimensionless impact velocity on the displacement and acceleration response of the components are discussed. Results the suspension angle, the frequency ratio and the damping at the connection between the main body and the foundation have significant effects on the response of the vulnerable parts. With the increase of the suspension angle of the system, the acceleration response amplitude of the system increases, the displacement response amplitude decreases, and the response period is shortened. Increasing the frequency ratio can effectively suppress the response amplitude of the damaged parts. Conclusion under the condition of drop impact, the design of suspension system should select appropriate suspension angle, frequency ratio and other relevant parameters to meet the need of product protection.
【作者單位】： 江南大學;國家輕工業包裝制品質量監督檢測中心;
【分類號】：TB485.1

【相似文獻】

相關期刊論文 前5條

1 許佩霞;;考慮易損件的斜支承包裝系統振動特性的研究[J];包裝工程;2011年19期

2 陳安軍;;考慮易損件的發動機斜支承減振系統沖擊特性研究[J];機械科學與技術;2014年07期

3 陳安軍;;半正弦脈沖激勵下斜支承系統易損件沖擊特性[J];噪聲與振動控制;2012年03期

4 段寧寧;陳安軍;;矩形脈沖激勵下斜支承系統易損件的沖擊特性研究[J];包裝工程;2013年07期

5 ;[J];;年期

相關碩士學位論文 前2條

1 郝蒙;具有桿式易損件的包裝系統動力學特性研究[D];江南大學;2015年

2 段寧寧;考慮易損件的斜支承包裝系統動力學特性研究[D];江南大學;2014年

，

本文編號：2391212